Sun-microsystems X4150 Manual de usuario descargar pdf (Pagina 24)

14 Sun Fire X4150 Server Installation Guide • May 2009

Attaching the Slide-Rail Assemblies to the Rack

Do one of the following procedures to attach the slide-rail assemblies to the rack:

■ “Disassembling Bolt-On Slide-Rails” on page 12

■ “Disassembling Tool-less Slide-Rails” on page 12

Attaching Bolt-On Slide-Rail Assemblies

To attach bolt-on slide-rail assemblies to the rack:

1. Position a slide-rail assembly in your rack so that the brackets at each end of

the slide-rail assembly are on the outside of the front and rear rack posts. (See

FIGURE 2-3.)

2. Attach the slide-rail assembly to the rack posts, but do not tighten the screws

completely.

Choose one of the following methods to attach the slide-rails. The method you

use varies, depending on the type of rack:

■ If your rack has threaded mounting holes in the rack posts, first determine

whether the threads are metric or standard, then insert the correct mounting

screws through the slide-rail brackets and into the threaded holes.

■ If your rack does not have threaded mounting holes, insert the mounting screws

through both the slide-rail brackets and rack posts, then secure them with the

caged nuts.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 81 82

Sin comentarios

Sun-microsystems X4150 Manual de usuario Pagina 24