Sun-microsystems X6450 Manual de usuario descargar pdf (Pagina 34)

24 Sun Blade X6450 Server Module Installation Guide • May 2009

This procedure also verifies that the ILOM is working correctly and that you can

access it through the CMM ILOM.

▼ To Display the Service Processor’s IP Address

Note – This procedure can be used for ELOM as well as ILOM 2.0 and ILOM 3.0.

1. Log in to the CMM ILOM CLI.

2. Type the command:

show /CH/BLn/SP/network

where n is the server module number or chassis slot ID.

The CMM ILOM displays information about the server module, including its IP

address and MAC address. For example:

Connecting to the ILOM

This section describes how to connect to the ILOM’s CLI and web interface.

-> show /CH/BL0/SP/network

/CH/BL0/SP/network

Targets:

Properties:

type = Network Configuration

commitpending = (Cannot show property)

ipaddress = IPaddress

ipdiscovery = dhcp

ipgateway = IPgateway

ipnetmask = 255.255.252.0

macaddress = Macaddress

pendingipaddress = IPaddress

pendingipdiscovery = dhcp

pendingipgateway = IPgateway

pendingipnetmask = 255.255.252.0

Commands:

set

show

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Sin comentarios

Sun-microsystems X6450 Manual de usuario Pagina 34