Sun-microsystems SUN FIRE 280R Manual de usuario Pagina 162

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 256
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 161
134 Sun Fire 280R Server Owner’s Guide January 2001
5. List the system’s current c1t1d* logical device links again.
The system responds with the logical links present in the directory.
6. Format the disk by typing the following command:
The system responds with the disks available for formatting.
7. Type the number of the hot-plug drive you are formatting.
8. Repeat Step 2 through Step 7 for every drive you are hot-plugging.
For more information, refer to the luxadm documentation in the Solaris on Sun
Hardware AnswerBook. This AnswerBook documentation is provided on the Solaris
Supplement CD for the Solaris release you are running.
Refer also to luxadm(1M), devfsadm(1M), and format(1M) man pages.
# ls /dev/ rdsk/ c1t1d*
/dev/rdsk/c1t1d0s0 /dev/rdsk/c1t1d0s1 /dev/rdsk/c1t1d0s2
/dev/rdsk/c1t1d0s3 /dev/rdsk/c1t1d0s4 /dev/rdsk/c1t1d0s5
/dev/rdsk/c1t1d0s6 /dev/rdsk/c1t1d0s7
# format
Searching for disks... done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@ 8,600000/ SUNW, qlc@ 4/ fp@ 0,0/ ssd@w210000203760c2fe, 0
1. c1t1d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@ 8,600000/ SUNW, qlc@ 4/ fp@ 0,0/ ssd@ w21000020371b1f31,0
Specify disk (enter its number): 1
selecting c1t1d0
[disk formatted]
Vista de pagina 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 255 256

Comentarios a estos manuales

Sin comentarios