Sun-microsystems Ethernet PCI-X Adapter Manual de usuario Pagina 75

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 78
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 74
Appendix D Installing the Sun 10-Gigabit Ethernet Device Driver on Linux Platforms 59
To Configure VLANs in a Linux Environment
1. Ensure that the ixge module is loaded:
2. Plumb the Sun 10-Gigabit Ethernet PCI-X interface:
where
xxx.xxx.xx.xxx = the IP address of the interface.
3. Insert the vlan module:
4. Add vlan instance (VID):
5. Configure ixge vlan (eth2 in this example):
where
xxx.xxx.xx.xxx = the IP address of the interface.
# modprobe ixge
# ifconfig eth2 xxx.xxx.xx.xxx up
# /sbin/insmod 8021q
# sbin/vconfig add eth2 5
# ifconfig eth2.5 xxx.xxx.xx.xxx up
Vista de pagina 74
1 2 ... 70 71 72 73 74 75 76 77 78

Comentarios a estos manuales

Sin comentarios