Sun-microsystems GigaSwift Ethernet Adapter Manual de usuario descargar pdf (Pagina 71)

Chapter 4 Configuring Driver Parameters 49

● To list all the parameters supported by the ce driver, type ?.

See

TABLE 4-1 through TABLE 4-12 for parameter descriptions.

Setting the Autonegotiation Mode

By default, autonegotiation is set to on. This means that the adapter communicates

with its link partner to determine a compatible network speed, duplex mode, and

flow control capability.

# ndd /dev/ce

name to get/set ? ?

? (read only)

instance (read and write)

adv_autoneg_cap (read and write)

adv_1000fdx_cap (read and write)

adv_1000hdx_cap (read and write)

adv_100T4_cap (read and write)

adv_100fdx_cap (read and write)

adv_100hdx_cap (read and write)

adv_10fdx_cap (read and write)

adv_10hdx_cap (read and write)

adv_asmpause_cap (read and write)

adv_pause_cap (read and write)

master_cfg_enable (read and write)

master_cfg_value (read and write)

use_int_xcvr (read and write)

enable_ipg0 (read and write)

ipg0 (read and write)

ipg1 (read and write)

ipg2 (read and write)

rx_intr_pkts (read and write)

rx_intr_time (read and write)

red_dv4to6k (read and write)

red_dv6to8k (read and write)

red_dv8to10k (read and write)

red_dv10to12k (read and write)

tx_dma_weight (read and write)

rx_dma_weight (read and write)

infinite_burst (read and write)

disable_64bit (read and write)

accept_jumbo (read and write)

name to get/set ?

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 125 126

Sin comentarios

Sun-microsystems GigaSwift Ethernet Adapter Manual de usuario Pagina 71