Sun-microsystems SUN NETRA CP3000 Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Chapter 1 Getting Started 1-15
FIGURE 1-6 Opening the Injector/Ejector Latch
Figure Leg end
1 Fully In (IN) When IN, the module communicates to the shelf manager that the module is not in the
hot-swap state, and the shelf manager communicates with the MMC. This position is for normal
operation.
2 Half Way (HW) When in the HW position, the hot-swap sequence is initiated. The MMC sends a
hot-swap event to the shelf manager.
3
Out (OUT) When OUT, the latching mechanism is released and the module can be extracted. Wait
for the Hot-Swap LED to stop blinking before pulling the latch all the way out.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Comentarios a estos manuales

Sin comentarios