Sun Microsystems X4100 Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Chapter 1 Setting Up the Server Hardware 15
5. If desired, connect an RJ-45 serial port cable to the “SERIAL MGT” connector.
Note the following considerations for the serial port and serial port cabling:
The default serial port speed is 9600 baud with no flow control.
These servers use the same pinout as the RJ45 port on the RSC/ALOM/ALOM
Plus cards on Sun Netra™ and other Sun Fire systems.
There is a compatible Sun RJ45-to-DB9 adapter shipped with the server, part
number 530-3100.
An alternative, compatible cable is the Cisco 72-3383-01 console cable.
6. Continue with “Powering On and Off the Server” on page 16.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

Comentarios a estos manuales

Sin comentarios