Sun-microsystems Ethernet MMF/UTP Adapter Manual de usuario Pagina 111

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 122
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 110
77
APPENDIX
C
Installing the Sun PCI-Express Dual
Gigabit Ethernet Device Driver on
Linux Platforms
This appendix explains how to install the Sun PCI-Express Dual Gigabit Ethernet
device driver in a Linux environment. This appendix contains the following sections:
“Setting Up the Driver on a Linux Platform” on page 77
“Tuning for Maximum Performance” on page 80
“Setting Driver Parameters in a Linux Environment” on page 82
Setting Up the Driver on a Linux
Platform
If your system uses the Linux operating system you will need to perform the
following procedure to be sure the Sun PCI-Express Dual Gigabit Ethernet device
driver is properly installed and loaded.
To Set Up the Driver on a Linux Platform
1. Build the Sun PCI-Express Dual Gigabit Ethernet device driver:
For RedHat, use the following command:
# rpmbuild --rebuild sun-pci-e-dual-gigabit-kernel-6.1.5.src.rpm
Vista de pagina 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 121 122

Comentarios a estos manuales

Sin comentarios