Sun-microsystems Sun Fire X4150 Server Manual de usuario descargar pdf (Pagina 31)

Chapter 2 Installing the Sun Fire X4150 Server Into a Rack with Slide-Rails 21

Installing the Cable Management Arm

Use this procedure to install an optional cable management arm (CMA). FIGURE 2-7

shows the CMA.

FIGURE 2-7 Cable Management Arm (CMA)

1. Unpack the cable management arm parts.

2. Take the CMA to the back of the equipment rack and ensure that you have

adequate room to work around the back of the server.

Note – References to “left” or “right” in this procedure assume that you are facing

the back of the equipment rack.

3. Remove tape to separate parts.

The CMA rail extension might be taped to the CMA arm.

4. Attach the CMA rail extension into the left slide-rail until the extension locks into

place with an audible click. (See FIGURE 2-8.)

FIGURE 2-8 Inserting the CMA Rail Extension Into the Back of the Left Slide-Rail

CMA rail

extension

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

Sin comentarios

Sun-microsystems Sun Fire X4150 Server Manual de usuario Pagina 31