Sun-microsystems 2000E Manual de usuario descargar pdf (Pagina 24)

2-8 SPARCserver2000E Power SupplyInstallationManual—April1995

Note – J3 is located on the top of the AC distribution unit, J2 is on the backside.

2. Remove the three Phillips screws and two #6-32 Phillips screws.

3. Carefully remove the power distribution unit from the system chassis.

RemovetheBreakerBox

1. Remove the power breaker box. See Figure 2-7.

a. Unplug the power cord from the breaker box going to the top power

supply.

b. Remove two screws from holes in the bottom lip of the breaker box

which secure it to the bottom power supply. Set the screws aside.

c. Unscrew two captive screws at the top of the breaker box securing it to

the top power supply.

d. Remove the box and set aside.

Figure 2-7 Removing the Power Breaker Box

Captive screws (2 places)

Screws (2 places, hidden)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

Sin comentarios

Sun-microsystems 2000E Manual de usuario Pagina 24