Sun-microsystems Netra CP32x0 Manual de usuario descargar pdf (Pagina 32)

2-2 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009

2.1 About Installing and Removing the

ARTM-HD

The ARTM-HD can be installed into an ATCA shelf (chassis) with a midplane made

for front and rear board installations (

FIGURE 2-1). The module must be installed in

the slot directly behind the Netra ATCA node board. These back-to-back slots have

common pins to enable passing of signals.

Note – Connectors on previous blade servers do not mate with connectors on the

ARTM-HD.

Before installing the ARTM-HD, verify the module’s part number to ensure that the

correct ARTM-HD is being installed into the system. For information on identifying

the ARTM-HD, see Section 1.10, “Part Number, Serial Number, and FC Address

Labels” on page 1-13.

Caution – Use the ARTM-HD only with compatible blade servers. Attempts to

install the ARTM-HD with an incompatible blade server might cause damage to

themselves and the blade server.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 65 66

Sin comentarios

Sun-microsystems Netra CP32x0 Manual de usuario Pagina 32