Sun-microsystems 3U Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 142
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
12 SunATM 3U CompactPCI Adapter Installation and User’s Guide February 2001
Preparing for the Installation
Before installing the adapter, prepare for the installation by assembling the
appropriate tools, unpacking the ship kit, verifying the system software, and
selecting an I/O slot.
Tools and Equipment Needed
Number 0 Phillips screwdriver
Antistatic wrist strap
Multimode fiber-optic cable
Electrostatic discharge (ESD) mat (optional)
Contents of the Ship Kit
The ship kit should contain the following items:
SunATM CompactPCI card
Antistatic wrist strap
This manual
A product note document (if needed)
Caution Electrostatic discharge can damage the integrated circuits on the cards.
Leave the cards in their antistatic envelopes until you are ready to install them in the
system.
Determining the Type of Adapter Installation
The adapter is a hot-swappable component that can be installed into a hot-swap-
compliant system without interrupting the operation of the system. The adapter can
also be installed in a cold environment, where you power down the system before
you install the adapter.
Determine whether you want to perform a hot swap installation of the adapter or a
cold installation.
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 141 142

Comentarios a estos manuales

Sin comentarios