Sun-microsystems Sun Quad Manual de usuario descargar pdf (Pagina 43)

Appendix B Configuring the Quad FastEthernet Device Driver Parameters 29

Reporting the Link Partner Capabilities

TABLE B-8 describes the read-only link partner capabilities.

If the link partner is not capable of auto-negotiation (when lp_autoneg_cap is 0)

the information described in

TABLE B-8 is not relevant and the parameter value = 0.

If the link partner is capable of auto-negotiation (when lp_autoneg_cap is 1) then

the speed and mode information is displayed when you use auto-negotiation and

get the link partner capabilities.

TABLE B-8 Read-Only Link Partner Capabilities

Parameter Values Description

lp_autoneg_cap 0

= No auto-negotiation

= Auto-negotiation

lp_100fdx_cap 0

= No100Mbit/sec full-duplex transmission

= 100Mbit/sec full-duplex

lp_100hdx_cap 0

= No 100Mbit/sec half-duplex transmission

= 100Mbit/sec half-duplex

lp_10fdx_cap 0

= No 10Mbit/sec full-duplex transmission

= 10Mbit/sec full-duplex

lp_10hdx_cap 0

= No 10Mbit/sec half-duplex transmission

= 10Mbit/sec half-duplex

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 61 62

Sin comentarios

Sun-microsystems Sun Quad Manual de usuario Pagina 43