Sun-microsystems SunFastEthernet Adapte Manual de usuario descargar pdf (Pagina 22)

2-2 SunFastEthernetAdapter UserGuide—November1994

Use the onboard transceiver RJ45 connector for Category 5, data grade

UTP wiring (100M maximum).

The external transceiver MII Interface connector can be used for

Category 5, data grade UTP or for other wiring types (dependent upon

the transceiver type). For example: Category 3 voice grade (UTP), fiber

optic, STP, etc.

5. Verify SunFastEthernet installation by testing the card as indicated in the

following section.

2.2 TestingtheSunFastEthernetAdapterCardBeforeBootingtheSystem

Note – To utilize the SunFastEthernet Adapter card, the system needs to

contain OpenBoot™ PROM (OBP) level 2.3 or later.

After the SunFastEthernet Adapter card is installed, and before booting the

system, verify installation by performing the following procedure:

1. Power on the system and when the banner appears press the L1-A key to

get to the ok prompt.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Sin comentarios

Sun-microsystems SunFastEthernet Adapte Manual de usuario Pagina 22