Sun-microsystems SunFastEthernet Adapte Manual de usuario descargar pdf (Pagina 71)

RunningDiagnostics C-5

C.1.1.1 RegisterTest

This test performs write, read, and compare on the QEC, bmac, and transceiver

registers. The test will then issue a reset to make sure that the appropriate

C.1.1.2 InternalLoopbackTest

This test will check the internal loopback data path.

C.1.1.3 TransceiverTest

This test will check the onboard transceiver connection and the link status.

C.1.1.4 Tx/RxEnable/DisableTest

This test will verify that the Tx and Rx state machines work properly when

disabled or enabled.

C.1.1.5 FrameCounterTest

This test will verify the Rx Frame, Length Error, and FCS Error counters. The

test will also verify the counter expiration status. Rx Frame can be tested by

sending good packets, Length Error can be tested by sending packets with

length exceeding max size, and FCS Error can be tested by sending packets

without FCS.

C.1.1.6 AddressDetectionTest

This test will verify the broadcast addressing mode, promiscuous modes, and

filter my own packet mode.

C.1.1.7 AddressHashTest

This test will verify the address hash table logic.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 87 88

Sin comentarios

Sun-microsystems SunFastEthernet Adapte Manual de usuario Pagina 71