Sun-microsystems 2.0 Manual de usuario descargar pdf (Pagina 28)

3-8 SunFastEthernetAdapter2.0 Installation and User’sGuide—July 1996

3.5.3 Booting From the Network Using Solaris 2.4

The device name of newer SBus cards for Solaris 2.5 is identified by a

“SUNW,” prefix. If your system is running Solaris 2.4, it will not recognize the

device. Perform the following tasks to set up your system so the device driver

can recognize the SunFastEthernet Adapter.

1. At the ok prompt type:

The show-devs command lists the system devices. You should see the full

path name of the hme device, similar to the example below:

2. Type:

3. Type the following exactly as shown, spaces and quotation marks

included, pressing the Return key at the end of lines 0, 1 and 2:

4. Press the Control-C keys after typing device-end.

5. At the ok prompt, type:

Your system will reset and the banner will appear.

ok setenv use-nvramrc? true

ok show-devs

/iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@3,8c00000

ok nvedit

0: probe-all install-console banner

1: cd (full path name of the hme device)

2: “ hme” nameprop

3: device-end

ok nvstore

ok reset

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Sin comentarios

Sun-microsystems 2.0 Manual de usuario Pagina 28