Sun-microsystems 2.0 Manual de usuario descargar pdf (Pagina 32)

3-12 SunFastEthernetAdapter2.0 Installation and User’sGuide—July 1996

3.6.4 Forcing Network Speed Between 10 Mbps and 100 Mbps

1. At the ok prompt, use the show-devs command to list the system devices.

You should see the full path name of the hme device, similar to the example

below:

2. Type:

3. Type the following, pressing the Return key at the end of line 0:

4. Press the Control-C keys after typing (full path name of the hme device).

Note – In the above example, the speed is forced to 10 Mbps. To force the

speed to 100 Mbps, replace 10 with 100.

5. At the ok prompt type:

6. Reboot your system.

Refer to the Platform Notes: The hme Fast Ethernet Device Driver document (Part

No: 802-5333) for more information on the hme device driver and forcing

network speed. This document is also available on the Solaris 2.5 and the

Solaris 2.5: 1/96 AnswerBook.

/iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@3,8c00000

ok nvedit

0: probe-all install-console banner

1: apply transfer-speed=10 (full path name of the hme device)

ok nvstore

ok setenv use-nvramrc? true

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Sin comentarios

Sun-microsystems 2.0 Manual de usuario Pagina 32