Sun-microsystems 2.0 Manual de usuario descargar pdf (Pagina 48)

4-14 SunFastEthernetAdapter2.0 Installation and User’sGuide—July 1996

4. Use the config command to rebuild the system configuration files for the

diskless client. You can now copy the new kernel over to the diskless

clients.

You need to remember to add the SunFastEthernet Adapter interface names to

/etc/hosts for each diskless client, and add the names of all the new

interfaces to NIS if you are using it. The name of the SunFastEthernet Adapter

interface will become the official host name for the diskless clients. If you do

not want this to happen, then use the SunFastEthernet Adapter install script to

do an install on one machine and copy the changes made to /etc/rc.boot to

the other diskless clients.

4.4 GettingtheDisklessClient(s)Ready

Perform the following tasks to set up your system so the device driver can

recognize the SunFastEthernet Adapter.

1. At the ok prompt type:

The show-devs command lists the system devices. You should see the full

path name of the hme device, similar to the example below:

2. Type:

ok setenv use-nvramrc? true

ok show-devs

/iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@3,8c00000

ok nvedit

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 59 60

Sin comentarios

Sun-microsystems 2.0 Manual de usuario Pagina 48