Sun-microsystems 2.0 Manual de usuario descargar pdf (Pagina 47)

InstallingSunFastEthernetAdapter 2.1 SoftwareOnSolaris1.1.1and1.1.2Systems 4-13

4.3.2 Building a New Kernel

The following instructions are a supplement to the instructions in Chapter 8,

“Administering Workstations,” in the SunOS manual, “System and Network

Administration.”

You can use the script install_hme on the client machine to configure a new

kernel containing a linkable driver for the SunFastEthernet Adapter.

Depending upon the size of the kernel on which you are basing the new

kernel, you need about 2 Mbytes of free space in your root partition. You can

use the install script to build a new kernel for each client individually. Follow

the directions in Section 4.2, “Installing from the CD-ROM.”

If you have a lot of diskless clients, installing the clients one by one may not be

practical. You can build the kernels manually by following the steps below.

SYS is assumed to be the directory where you build kernels for your diskless

client. Use whatever path is right for you in place of SYS.

1. Type:

2. Add the following lines to SYS/sun4m/conf/files:

3. Add the following lines to the configuration file that you use for building

diskless client kernels:

# cp /usr/HME/sys/sunif/* SYS/sunif

# cp /usr/HME/sys/sun4m/OBJ/* SYS/sun4m/OBJ

# cp SYS/sun4m/conf/files SYS/sun4m/conf/files.prehme

# SunFastEthernet Controller

sunif/if_hme.c optional hme

sunif/hme_.c optional hme

# SunFastEthernet Controller

device-driver hme

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Sin comentarios

Sun-microsystems 2.0 Manual de usuario Pagina 47